Go to…

Buick

Home / Buick

We Service and Repair all Buick cars

  • 2005 Buick LeSabre

    Buick LeSabre
    Mileage
    117,359
    Service Date
    1/7/2026
    Services Performed
    • Remove wheels, inspect pad/shoe condition & thickness Front _75__% Rear _50__% Inspect caliper/cylinder for leakage & operation Inspect master cylinder, brake lines & hoses for operation & leaks
    • Drain radiator, flush engine block, add coolant & pressure test.
    • Remove old serpentine belt Install new belt and adjust Test drive for proper operation
     
    ANDRES H. gave our service a 5 star review on 1/7/2026

  • 2016 Buick Verano

    Buick Verano
    Mileage
    154,533
    Service Date
    2/6/2025
    Services Performed
    • Raise the vehicle on the hoist and inspect Found transmission fluid inspection plug out of hole and resting on transmission Check and add fluid and reinstall inspection plug Check and tighten seeping radiator hose clamps Check and refill fluids Test drive for proper operation
    • Remove all ignition coils Remove old spark plugs Gap and install new spark plugs Reassemble and test drive for proper operation
     
    SARAH H. gave our service a 5 star review on 2/6/2025

  • 2005 Buick LeSabre

    Buick LeSabre
    Mileage
    70,228
    Service Date
    2/25/2022
    Services Performed
    • Test drive to experience problem – no problem experienced at this time Scan for trouble codes – none present on "Engine" or "Transmission" Check all fluids – transmission slightly low Add transmission fluid Raise the vehicle on the hoist and inspect Found transmission pan gasket and transmission cooler lines leaking Recommend replacing trans cooler lines and service transmission Test battery and alternator – charging 14.1 volts (Normal) Test drive for 3 days – no problem experienced at this time
     
    BARBARA B. gave our service a 5 star review on 3/4/2022

  • 2012 Buick Enclave

    Buick Enclave
    Mileage
    113,320
    Service Date
    12/18/2020
    Services Performed
    • Drain fluid, change filter, make necessary adjustments, replace gasket & refill
    • Raise vehicle on hoist and remove front wheels Disconnect all brackets going to struts Remove lower strut bolts and support hub spindle Remove upper strut bolts and remove front struts Compress springs and transfer springs to new struts Install new struts and reconnect hub spindle Reconnect all brackets going to strut and test drive for proper operation
    • Release tension on belt and remove old serpentine belt Remove old belt tensioner Install new belt tensioner Properly route new serpentine belt and add tension to belt
    • Replace windshield
    • Support engine Remove old transmission mount and install new transmission mount Reassemble and test drive for proper operation
    • Used Scan Tool on Vehicle Trouble Codes Found: #U0101 lost communication lost with transmission control module #PO324 knock sensor module performance #CO561 system disabled information stored invalid serial data received Check battery and connections Test charging system Scan system data – all normal at this time Check for Tech Bulletins Found Bulletins for water intrusion into the instrument panel and TCM Clear codes and test drive No codes or problem experienced after several days
     
    DIANE O. gave our service a 5 star review on 12/23/2020